Pre-treatment agent for disperse inks:
The thickening agent is applied in the inkjet pre-treatment before printing on the PES. The thickening agent used should prevent the sprayed ink from spreading and deliver even print output with sharp outlines. High colour yield must be guaranteed for the subsequent fixing process. An optimum inkjet pre-treatment agent influences the handle of the goods so little that rewashing is not necessary. Our thickener fulfils this requirement. Rewashing of prints is only necessary with the most exacting fastness requirements. As an alternative we offer conventional print pre-treatment systems where print rewashing is necessary.
Trade name: CHIPTEX

Fixing additive:
Improves colour yield when printing with disperse dyes.
Trade name: RAPIDOPRINT

Oxidation agent:
Inhibits destruction of the dye through reductive influences.
Trade name: RAPIDOPRINT

Penetration additives, deaerators:
Additives specially adapted for disperse printing which permit very good wetting and penetration of the thickener into the fabric as required.
Trade name: RAPIDOPRINT

Print rewashing:
We offer finishing treatment additives in order to satisfy the most stringent fastness requirements.

Trade names: PRINTOBLANC, RAPIDOPRINT

CHT/BEZEMA worldwide

Product-Search